P V Fluid Products releases information on how its new Positive Displacement Motors for Directional Drilling will change things in the Well Drilling Power Section Manufacturer space for the better. Further information can be found at http://pvfuid.com.
Earlier today, P V Fluid Products announced the launch of HS 88 High Strength Elastomer, its new Positive Displacement Motors for Directional Drilling set to go live in 2017. For anyone with even a passing interest in the world of Well Drilling Power Section Manufacturer, this launch will be worth paying attention to, as it’s set to shake things up.
Currently, with even a passing glance, a person will notice If you spend some time researching Positive Displacement Motors you will see that technology and results have stayed the same for the last 20 years. The Product Manager at PV Fluid Products, Dale Schultz, makes a point of saying “things are going to change when HS 88 High Strength Elastomer becomes available to the market”.
Dale Schultz continues, “Most competitors are doing the same old thing, HS88 outperforms all the other power sections in the market tested in the most challenging conditions! P V Fluid Products is bringing new technology to the market to reduce downtime and increase customer’s profits. This is done to provide the best value for the client. Helping customers succeed is possible because it is now possible to design drill motors specifically for any application formation. Ultimately this is going to be a huge benefit because it will give the end user the right tools to do the job right the first time. HS88 is going to help by driving down non-productive time! Improving stator life in aggressive applications, improve the ability to maintain higher differential pressures, allow operation through a broader temperature range, Reduced chunking failures, and ultimately producing Higher Rate of Penetration (ROP). The bottom line is an Increased bottom line.”
Established in 1993 P V Fluid Products has been operating for 24 years, and it has always maintained the business plan to provide the best rotor and stator power sections available anywhere in the world. Designing specific power sections for the formations our customers are drilling. Also, the mud motors are designed for speed and torque and offer little chemical swell in any oil based mud.
Currently, the closest thing to HS 88 High Strength Elastomer is turbine technology, but PV Fluid Products improved on this by reducing and simplifying the moving parts, which in turns drastically reduces the rate of failure. The biggest advantage to PV Power Sections over turbine technology is the ability to provide variable speed control while maintaining pressure requirements. HS 88 The High Strength Elastomer which makes up part of the motor has vastly improved on previous technologies due to minimal chemical swell, improved stator life in aggressive applications, ability to maintain higher differential pressures, broader temperature operating range and fewer failures due to chunking. These advancements alone are predicted to make PV Fluid Products’ Positive Displacement Motors for Directional Drilling more popular with customers drilling oil and gas wells, quickly.
An recent case study was completed and documented by A leading directional drilling company that completed a 10K lateral in Glasscock County in a single run. The down hole motor used HS88 stator elastomer in a 6 3/4″ 7/8 lobe 5.7 stage power section. HS88 stator elastomer – provides more uptime, faster ROP’s and a better bottom line.
Once again, HS 88 High Strength Elastomer is available. To find out more, the place to visit is P V Fluid online for more information.
For further information about P V Fluid Products, can be discovered at http://pvfuid.com