If you plan to have a whole wine collection brewing in your cellar, make sure that cellar is properly insulated! Check out USA Spray Me’s guide to see which materials last the longest. You can also call them at (855) 566-5340 for more information.
Whether you own a commercial winery or are simply a connoisseur, you know how time-consuming and costly it can be to create the perfect wine. Now imagine all your hard work going down the drain because some errant draft made it into your cellar and cooled the entire room too much! That’d surely be a nightmare, right? Luckily, you can prevent that from becoming a reality by installing the proper insulation, and USA Spray Me is here to walk you through which materials are the best for wine storage areas.
Read their full guide at https://usasprayme.com/blog/california-wine-cellar-insulation-which-option-lasts-the-longest.html
As you’re probably aware, wine production is a delicate process that requires bottles to be stored at specific temperatures that remain consistent throughout the year. Insulation is a crucial component of wine cellars and other specialized storage areas, especially in California, where daytime and nighttime temperatures can vary drastically. The right material and proper installation practices will ensure that wine quality will not be jeopardized by fluctuating temperatures or humidity levels.
When choosing an insulating material, USA Spray Me’s guide says that you should consider the R-value of the product; the higher the R-value, the better the insulating properties. Additionally, the insulation should be able to guard against moisture to keep humidity levels stable. Notable insulating materials include fiberglass batts and closed-cell polyurethane spray foam, which are both commonly used in wine cellars.
According to USA Spray Me’s guide, fiberglass batt insulation is the more cost-effective option of the two, as it is widely available and easy to apply.
While it is less effective at controlling moisture than other materials, you can install a plastic vapor barrier to prevent condensation. However, fiberglass batts can settle over time and may require more frequent replacements as a result. In other words, you may end up paying more for fiberglass than what you thought you would.
On the other hand, spray foam insulation has a higher R-value and can last for decades longer than fiberglass batts. When allowed to cure, the material expands to form a continuous barrier that seals any voids, preventing air and water infiltration - allowing it to act as both an insulator and a vapor barrier.
Although upfront costs are higher, USA Spray Me says that these will be offset by lower maintenance requirements and long-term energy savings. After all, if it keeps insulating at the same efficiency as it did when it was first installed, you won’t have to replace it, and you can continue enjoying those lower utility bills. No points for guessing which team USA Spray Me is on!
But unlike fiberglass batts, spray foam insulation requires professional equipment and, in general, isn’t something you want to try installing on your own. If you’re planning an upgrade project with spray foam, you should instead contact USA Spray Me. The company has over a decade of experience in spray foam and will ensure the insulation is installed safely with as little downtime as possible.
Of course, if you’re still on the fence about which choice is better for you, you can check out USA Spray Me’s full guide. Alternatively, give them a call; they’ll give you a free property inspection and walk you through what needs to be done to protect your wine cellar.
Visit https://usasprayme.com/ to get started!
